Profile
International Journal of Metallurgical & Materials Engineering Volume 1 (2015), Article ID 1:IJMME-114, 4 pages
http://dx.doi.org/10.15344/2455-2372/2015/114
Research Article
Transformer Oils Potential for PCBs Contamination

V. Pelitli1*, Ö. Doğan1 and H. J. Köroğlu2

1The Scientific and Technological Research Council of Turkey, Marmara Research Center, Environment and Cleaner Production Institute, Kocaeli/Turkey
2The Scientific and Technological Research Council of Turkey, Marmara Research Center, Institute of Chemistry, Kocaeli/Turkey
Mr. Volkan Pelitli, The Scientific and Technological Research Council of Turkey, Marmara Research Center, Environment and Cleaner Production Institute, Kocaeli/Turkey; E-mail: volkan.pelitli@tubitak.gov.tr
25 July 2015; 19 September 2015; 21 September 2015
Pelitli V, Doğan O, Köroğlu HJ (2015) Transformer Oils Potential for PCBs Contamination. Int J Metall Mater Eng 1: 114. doi: http://dx.doi.org/10.15344/2455-2372/2015/114
This study was funded by TUBITAK, The Scientific and Technological Research Council of Turkey, scientific research project with the grant number 107G007.

Abstract

Polychlorinated biphenyls (PCBs) are a class of synthetic organic chemicals consisting of from one to ten chlorine atoms bonded totwo phenyl rings that create up 209 possible variations referred to as congeners. PCBs were commercially produced world-wide on a large scale between the 1930s and 1980sthat had been used widely in variety of commercial equipment like transformers, capacitors and other electrical equipment because of their useful quality as being a fire retardant. But due to their persistence and ubiquitous distribution in the environment, PCBs were banned from the U.S in the 1970s and internationally through the Stockholm Convention on Persistent Organic Pollutants. Although banned by law and punished heavily, large numbers of PCB-contaminated transformers are still in service. Thus, there remains a huge reservoir of PCBs with the potential to serve as sources of contamination to the environment. In this study, using EN 12766 test method: “Petroleum products and used oils-Determination of PCBs and related products”, PCBs were analyzed in the random samples collected from different regions of Turkey. The samples also used for screening for the presence of total halogens and chlorine. Test results of the study showed that PCBs were present in certain transformers but concentrations in the most of samples did not exceed the limit value of 50 ppm.However, there was a significant relationship between the PCB concentrationsand the halogens.Finally, the contaminated transformer oils were evaluated according to Regulation on Control ofWaste Oils.