International Journal of Metallurgical & Materials Engineering Volume 1 (2015), Article ID 1:IJMME-108, 5 pages
http://dx.doi.org/10.15344/2455-2372/2015/108
http://dx.doi.org/10.15344/2455-2372/2015/108
Research Article
Machining of Pure High Grade Titanium: Effect on the Subsurface Microstructure
References
- Arrazola PJ, Garay A, Iriarte LM, Armendia M, Marya S, et al. (2009) Machinability of titanium alloys (Ti6Al4V and Ti555.3). J Mater Process Tech 209: 2223-2230. View
- Velasquez JD, Tidu A, Bolle B, ChevrierP, Fundenberger JJ (2010) Subsurface analysis of high speed machined TA6V. Material Sci Eng A: 527: 2572-2578.
- M'Saoubi R, Ryde L (2005) Application of the EBSD technique for the characterisation of deformation zones in metal cutting. Mater Sci Eng A 405: 339-349. View
- Komanduri R, Von Turkovich BF (1981) New observations on the mechanism of chip formation when machining titanium alloys. Wear 69: 179-188. View
- Puerta Velasquez JD, Bolle B, Chevrier P, Tidu A (2007) Metallurgical study of chips obtained by high speed machining of Ti-6wt.%Al-4wt.%V alloy. Mater Sci Eng A 452-453: 469-474. View
- Barry j, Byrne G, Lennon D (2001) Observations on chip formation and acoustic emission in machining Ti-6Al-4V alloy. Int J Mach Tools Manuf 41: 1055-1070. View
- BurnsTJ, Davies MA (2002) On repeated adiabatic shear band formation during high-speed machining. Int J Plast 18: 487-506. View
- Zhang Y, Mabrouki T, Nélias D, Courbon C, Rech J, et al. (2012) Cutting simulation capabilities based on crystal plasticity theory and discrete cohesive elements. J Mater Process Tech 212: 936-953. View
- Hung NP, Zhong ZW, Lee KK, Chai CF (1999) Precision grinding and facing of copper-beryllium alloys. Precision Eng 23: 293-304. View
- Sarkar J, Gillman PS (2008) Imaging of ultrafine grains in machined tantalum using a focused ion beam. Scripta Materalia 59: 301-304. View
- Crawforth P, Wynne B, Turner S, Jackson M (2012) Subsurface deformation during precision turning of a near-alpha titanium alloy. Scripta Materialia 67: 842-845. View
- Lee WB, To S, Cheung CF (2000) Effect of crystallographic orientation in diamond turning of copper single crystals. Scripta Materialia 42: 937-945. View
- Moriwaki T, Okuda K, Shen JG (1993) Study of ultraprecision orthogonal microdiamond cutting of single-crystal copper. JSME Int J Series C 36: 400-406. View
- To S, Lee WB, Cheung CF (2003) Orientation changes of aluminum single crystals in ultra-precision diamond turning. J Materials Process Tech 140: 346-351. View
- Dargusch MS, Zhang MX, Palanisamy S, Buddery AJM, St John DH (2008) Subsurface deformation after dry machining of grade 2 Titanium Adv Eng Mat 10: 85-88. View
- Schuman C, Bao L, Lecomte JS, Zhang Y, Raulot JM, (2012) A New Variant Selection Criterion for Twin variants in Titanium alloys (part2). Adv Eng Mat 14. View
- Wang S, Schuman C, Bao L, Lecomte JS, Zhang Y, et al. (2012) Variant Selection Criterion for Twin Variants in Titanium alloys deformed by rolling. Acta Materialia 60: 3912-3919. View
- Martin E, Capolongo L, Jiang L, Jonas JJ (2010) Variant selection during secondary twinning in Mg-3%Al Acta Mater 58: 3970-3983. View
- Thomas M, Turner S, Jackson M (2010) Microstructural damage during high-speed milling of titanium alloys. Scripta Materialia 62: 250-253. View