International Journal of Metallurgical & Materials Engineering Volume 4 (2018), Article ID 4:IJMME-143, 8 pages
http://dx.doi.org/10.15344/2455-2372/2018/143
http://dx.doi.org/10.15344/2455-2372/2018/143
Research Article
Acoustic Emission Feasibility Study for Carbon Epoxy Coated Aluminum Corrosion Monitoring
References
- Fekih SM, Albedah A, Benyahia F, Belhouari M, Bouiadjra BB, et al. (2012) Optimisation of the sizes of bonded composite repair in aircraft structures. Mater Des 41: 171-176. View
- Vagask A, Fechov E, Michal P, Gombar M (2016) The influence of input factors of aluminium anodizing process on resulting thickness and quality of aluminium oxide layer. Procedia Eng 149: 512-519. View
- Gkikas G, Sioulas D, Lekatou A, Barkoula NM, Paipetis AS, et al. (2012) Enhanced bonded aircraft repair using nano-modified adhesives. Mater Des 41: 394-402. View
- Fereidoon A, Kordani N, Rostamiyan Y, Ganji DD, Ahangari MG, et al. (2010) Effect of CNTs on adhesion strength of eglass/epoxy composite with alloy aluminum surface. World Appled Sci Journal 9: 204-210. View
- Khun NW, Troconis BCR, Frankel GS (2014) Effects of carbon nanotube content on adhesion strength and wear and corrosion resistance of epoxy composite coatings on AA2024-T3. Prog Org Coatings 77: 72-80. View
- Yu S, Tong MN, Critchlow G (2010) Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum plates. Mater Des 31: S126-S129. View
- Baltzis D, Orfanidis S, Lekatou A, Paipetis AS (2016) Stainless Steel coupled with carbon nano-tube modified epoxy and carbon fibre composites : Electrochemical and mechanical study. Plast Rubber Compos. View
- Gkikas G, Lekatou A, Sioulas D, Paipetis AS (2014) Effect of carbon nanotube enhanced adhesives on degradation of bonded joints in corrosive environments. Plast Rubber Compos 43: 322-329. View
- Baltzis D, Bekas DG, Tzachristas G, Parlamas A, Karabela M, et al. (2017) Multi-scaled carbon reinforcements in ternary epoxy composite materials: Dispersion and electrical impedance study. Compos Sci Technol 153: 7-17. View
- Khashaba UA, Aljinaidi AA, Hamed MA (2015) Analysis of adhesively bonded CFRE composite scarf joints modified with MWCNTs. Compos Part A Appl Sci Manuf 71: 59-71. View
- Khashaba UA, Aljinaidi AA, Hamed MA (2014) Nanofillers modification of Epocast 50-A1/946 epoxy for bonded joints. Chinese J Aeronaut 27: 1288- 1300. View
- Szeluga U, Kumanek B, Trzebicka B (2015) Synergy in hybrid polymer/ nanocarbon composites. A review. Compos. Part A Appl Sci Manuf 73: 204- 231. View
- Sumfleth J, Adroher XC, Schulte K (2009) Synergistic effects in network formation and electrical properties of hybrid epoxy nanocomposites containing multi-wall carbon nanotubes and carbon black. J Mater Sci 44: 3241-3247. View
- Ma PC, Liu MY, Zhang H, Wang SQ, Wang R, et al. (2009) Enhanced electrical conductivity of nanocomposites containing hybrid fillers of carbon nanotubes and carbon black. ACS Appl Mater Interfaces 1: 1090–1096. View
- Bellenger F, Mazille H, and H, Idrissi H (2002) Use of acoustic emission technique for the early detection of aluminum alloys exfoliation corrosion. NDT E Int 35: 385-392. View
- Idrissi H, Derenne J, Mazille H. Detection of Pitting Corrosion of Aluminium Alloys By Acoustic Emission Technique. View
- Boinet M, Bernard J, Chatenet M, Dalard F, Maximovitch S, et al. (2009) Understanding aluminum behaviour in aqueous alkaline solution using coupled techniques. Part II: Acoustic emission study. Electrochim Acta 55: 3454-3463. View
- Bellenger F, Mazille H, Idrissi H (2002) Use of acoustic emission technique for the early detection of aluminum alloys exfoliation corrosion. NDT E Int 35: 385-392. View
- Munoz V, Vales B, Perrin M, Pastor ML, Welemane H et al. (2016) Damage detection in CFRP by coupling acoustic emission and infrared thermography. Compos. Part B Eng 85: 68-75. View
- Strantza M, Van Hemelrijck D, Guillaume P, Aggelis DG (2017) Acoustic emission monitoring of crack propagation in additively manufactured and conventional titanium components. Mech Res Commun 84: 8-13. View
- Fregonese M, Idrissi H, Mazille H, Renaud L, Cetre Y, et al. (2001) Monitoring pitting corrosion of AISI 316L austenitic stainless steel by acoustic emission technique: Choice of representative acoustic parameters. J Mater Sci 36: 557-563. View
- Masmoudi S, El Mahi A, El Guerjouma R (2014) Mechanical behaviour and health monitoring by acoustic emission of sandwich composite integrated by piezoelectric implant. Compos Part B Eng 67: 76-83. View
- Zaki A, Chai HK, Aggelis DG, Alver N (2015) Non-Destructive Evaluation for Corrosion Monitoring in Concrete: A Review and Capability of Acoustic Emission Technique. Sensors 15: 19069. View
- Farhidzadeh A, Mpalaskas AC, Matikas TE, Farhidzadeh H, Aggelis DG, et al. (2014) Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features. Constr Build Mater 67: 129-138. View
- Xu J, Wu X, Han EH (2013) Acoustic emission response of sensitized 304 stainless steel during intergranular corrosion and stress corrosion cracking. Corros Sci 73: 262-273. View
- Hwang W, Bae S, Kim J, Kang S, Kwag N, et al. (2015) Acoustic emission characteristics of stress corrosion cracks in a type 304 stainless steel tube. Nucl Eng Technol 47: 454-460. View
- Seah KHW, Chew CH, Teoh SH (1993) The correlation of acoustic emission with rate of corrosion. 34: 1-7. View
- Bak KM, Kalaichelvan K, Jothilingam A, Boopathy SR, Bak KM, et al. (2016) Acoustic emission characterization of failure modes of single-lap joints in glass/epoxy specimens. J Compos Mater 50: 3-23. View
- Bak KM, Kalaichelvan K, Arumugam V (2014) A novel approach for classification of failure modes in single lap joints using acoustic emission data. J Compos. Mater 48: 3003-3017. View
- Silverman DC (2011) Uhlig’s Corrosion Handbook. 3rd ed., Wiley & Sons, 1129-1166.
- Lekatou A, Sioulas D, Karatzalis AE, Grimanelis D (2015) A comparative study on the microstructure and surface property evaluation of coatings produced from nanostructured and conventional WC-Co powders HVOFsprayed on Al 7075. Surf Coatings Technol 276: 539-556. View
- Seri O (2000) Corrosion and Environmental Degradation. Wiley-VCH.
- Hunter MS, Fowle P (1956) Naturally and thermally formed oxide films on aluminum. J Electrochem Soc 103: 482-485. View
- Altenpohl DG (1998) Aluminum: technology, applications, and environment: a profile of a modern metal. 6th edn, Washington, DC, Aluminium Association.
- Foley RT (1986) Localized corrosion of aluminum alloys- a review. Corrosion 42: 277-288. View
- Szklarska-Smialowska Z (1999) Pitting corrosion of aluminum. Corros Sci 41: 1743-1767. View
- DeRose JA, Balkowiec A, Mchalski J, Suter T, Kurzydlowski KJ, et al. (2012) Microscopic and macroscopic characterization of an aerospace aluminum alloy (AA2024). WIT Press Southampton UK View
- Birbilis N, Buchheit RG (2005) Electrochemical characteristics of intermetallic phases in aluminum alloys: an experimental survey and discussion. J Electrochem Soc 152: 140-151. View
- Turnbull A (1983) The solution composition and electrode potential in pits, crevices and cracks. Corros Sci 23: 833-870. View
- Lekatou A, Sfikas A, Karantzalis A, Sioulas D (2012) Microstructure and corrosion performance of Al-Co alloys. Corros Sci 63: 193-209. View
- Rosen EM, Silverman DC (1992) Corrosion prediction from polarization scans using an artificial neural network integrated with an expert system. Corrosion 48: 734-745. View
- Lekatou A, Faidi SE, Ghidaoui D, Lyon SB, Newman RC, et al. (1997) Effect of water and its activity on transport properties of glass/epoxy particulate composites. Compos Part A Appl Sci Manuf 28: 223-236. View
- Lekatou A, Faidi SE, Lyon SB, Newman RC (1996) Elasticity and fracture in particulate composites with strong and degraded interface. J Mater Res 11: 1293-1304. View
- Billingham N (2008) Degradation and stabilisation of polymers.
- McCafferty E (2005) Validation of corrosion rates measured by the Tafel extrapolation method. Corros Sci 47: 3202-3215. View
- Lekatou A, Zois D, Karantzalis AE (2010) Electrochemical behaviour of cermet coatings with a bond coat on Al7075: pseudopassivity, localized corrosion and galvanic effect considerations in a saline environment. Corrosion Science 52: 2616-2635. View