International Journal of Mechanical Systems Engineering Volume 2 (2016), Article ID 2:IJMSE-111, 7 pages
http://dx.doi.org/10.15344/2455-7412/2016/111
http://dx.doi.org/10.15344/2455-7412/2016/111
Review Article
Fea and 3D Printing, the Perfect Match?
References
- Turner MJ, Clough RW, Martin HC, Topp LJ (1956) Stiffness and Deflection Analysis of Complex Structures. Journal of Aeronautical Science 23: 805- 823. View
- MacNeal RH (1974) Some organizational aspects of NASTRAN. Nuclear Engineering and Design 29: 11. View
- Pace DK (2004) Modeling and Simulation Verification and Validation Challenges. Johns Hopkins APL Technical Digest 25: 10. View
- Pham DT, Dimov SS (2001) Rapid manufacturing; The Technologies and Applications of Rapid Prototyping and Rapid Tooling London: Springer Verlag. View
- Hopkinson N, Hague RMJ, Dickens PM (2005) Rapid Manufacturing: An Industrial Revolution for the Digital Age. Chicheste, West Sussex: John Wiley and Sons Ltd. View
- van Rietbergen B, Weinans H, Huiskes R, Odgaard A (1995) A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models. Journal of Biomechanics 28: 69- 81. View
- Gartner I (2012) Gartner's hype cycle special report for 2012. Secondary Gartner's hype cycle special report for 2012. View
- Shipp SS, Gupta N, Lal B, Scott JA, Weber CL, et al. (2012) Emerging Global Trends in Advanced Manufacturing. Alexandria: Institute For Defense Analysis. View
- Wohler T (2012) Wohlers Report, Additive Manufacturing and 3D Printing State of the Industry. Fort Collins.
- Wohler T (2004) Wohlers report 2004. In: Wohler T, ed. Wohlers report. Fort Collins 270.
- Bassoli E, Gatto A, Iuliano L (2012) Joining mechanisms and mechanical properties of PA composites obtained by laser sintering. International Journal of Rapid Prototyping 18: 100-108. View
- Wohler T (1999) Rapid prototyping and tooling, state of the industry. In: association W, ed. Fort Collins 265.
- Capjon J (2004) Trial and error based innovation [PhD Thesis]. Oslo School of Architecture and Design.
- Killi S (2013) Designing for Additive Manufacturing: Perspectives from Product Design. Oslo School of Architecture and Design. View
- Zarbakhsh J, Iravani A, Amin-Akhlagi Z (2015) Sub-modeling Finite Element Analysis of 3D printed structures. 16th International Conference on Thermal Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Budapest: IEEE, 2015:4.
- Oxman N. Finite Element Synthesis. In: Bartolo P, ed. VRAP. Leiria: Taylor&Francis, 2011:7.
- Stava O, Vanek J, Benes B, Carr N, Mech R, et al. (2012) Stress Relief: Improving Structural Strength of 3D Printable Objects, SIGGRAPH 2012, Los Angeles. View
- 3Dsystems: http://www.3dsystems.com/products/solidimaging/lasers intering/datasheets.asp#DuraForm. View
- Secondary: http://www.3dsystems.com/products/solidimaging/lasers intering/datasheets.asp#DuraForm 2005. View
- Hensel M, Gharleghi M (2012) Iran-Past, Present and Future. Architectural Design 82: 11. View