Profile
International Journal of Computer & Software Engineering Volume 1 (2016), Article ID 1:IJCSE-105, 9 pages
https://doi.org/10.15344/2456-4451/2016/105
Review Article
Computational Simulated Verification of Hybrid Laminar Flow Design by Suction Method

Amir Zare Shahneh

Centre of Aeronautics, Cranfield University, College Rd, Cranfield MK43 0AL, United Kingdom
Dr. Amir Zare Shahneh, Centre of Aeronautics, Cranfield University, College Rd, Cranfield MK43 0AL, United Kingdom; E-mail: a.zareshahneh@cranfield.ac.uk
25 April 2016; 08 June 2016; 10 June 2016
Shahneh AZ (2016) Computational Simulated Verification of Hybrid Laminar Flow Design by Suction Method. Int J Comput Softw Eng 1: 105. doi: https://doi.org/10.15344/2456-4451/2016/105

References

  1. Joslin RD (1998) Overview of Laminar Flow Control. NASA/TP-1998- 208705.
  2. Naranoot W (1999) A Design Study of Long Range Subsonic Transport Aircraft Using Hybrid Laminar Flow Control on the Wing. MSc Thesis, School of Engineering, Cranfield Univ UK.
  3. Anscombe A, Illingworth LN (1956) Wind Tunnel Observations of Boundary Layer Transition on a Wing at Various Angles of Sweepback. Aeronaut Res Council 2968.
  4. Lachmann GV (1961) Aspects of Design Engineering and Operational Economy of Low Drag Aircraft. Boundary Layer Flow Cont 2: 1123-1166.
  5. Wilson RAL (1997) The Introduction of Laminar Flow to the Design and Optimisation of Transport Aircraft. School of Engineering, Cranfield Univ 1997.
  6. Wood A (2003) Design Study on the Use of Distributed Pumping Within a Hybrid Laminar Flow Control System. MSc Thesis UK.
  7. NASA (1999) High Reynolds Number Hybrid Laminar Flow Control (HLFC) Flight Experiment II. Aerodyn Design. NASA/CR-1999-209326. View
  8. Thomas-Bourgneuf V (2010) Numerical Modelling and Analysis of a Novel Hybrid Laminar Flow System. Cranfield Univ, UK.
  9. NASA (999) High Reynolds Number Hybrid Laminar Flow Control (HLFC) Flight Experiment IV. Suction System Design and Manufacture. NASA/CR- 1999-209326, 1999.
  10. Stellars ND (1999) A Study to Indicate the Number of Plenum Chambers Required for a HLFC System on a Military Delta Wing/Canard Configurations. Bae-BAE-RP-RES-5510.
  11. TUBRBOMATCH, a tool for aero-engine modelling and management, Cranfield University, UK.
  12. Zare Shahneh A, Motallebi F (2009) An Experimental Study on the Influence of Vortex Generator on the Shock-Induced Boundary Layer Separation at M=1.4". ASME J App Mechan. View
  13. Aktin C, QinetiQ Ltd (2004) Performance Trade-off Studies for a Retrofit Hybrid Laminar Flow Control System. 2nd AIAA Flow Control Conf Oregon. View